Flexible Endoscope Reprocessing – CSSD MCQ Questions and Study Notes
Flexible endoscopes are heat-sensitive, complex devices that need strict, validated reprocessing. Practice free CSSD MCQ questions on this topic below.
Take the Flexible Endoscope Reprocessing practice test All 45 chapters
Learning objectives
- Understand the key concepts of this chapter
- Apply them using US sterile processing practice
Study notes
Pre-clean at the bedside right after use so soil cannot dry. Perform a leak test before immersion, then manually clean all channels with correctly sized brushes per the IFU. Most flexible endoscopes are semi-critical and receive high-level disinfection (or sterilization when required).
After rinsing, channels are flushed with alcohol and dried with air, and the scope is stored hanging vertically in a drying cabinet or clean, ventilated area. Duodenoscopes have complex elevator mechanisms that have been linked to infection outbreaks. A failed leak test means the scope is removed from service.
Important points
- Pre-clean immediately
- Leak test before immersion
- Brush every channel
- Dry and hang to store
Key terms
Leak test High-level disinfection Channel brush Duodenoscope
Practice MCQs on Flexible Endoscope Reprocessing
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. Bedside pre-cleaning of an endoscope is done:
- Immediately after use
- After storage
- The next day
- Never
Show answer
US practice: Prevents soil from drying.
2. A leak test is performed:
- Only yearly
- Never
- Before immersion in cleaning solution
- After storage
Show answer
US practice: Detects damage.
3. Most flexible endoscopes are classified as:
- Non-critical
- Semi-critical
- Disposable
- Critical
Show answer
US practice: Contact mucous membranes.
4. After HLD and rinsing, channels are flushed with alcohol and:
- Soaked again
- Dried with air
- Sealed
- Left wet
Show answer
US practice: Drying prevents microbial growth.
5. Endoscopes are best stored:
- Hanging vertically in a ventilated or drying cabinet
- Coiled in a closed case
- Wet in a tray
- On the floor
Show answer
US practice: Allows drying.
6. Complex elevator mechanisms are a concern in:
- Stethoscopes
- Blood pressure cuffs
- Thermometers
- Duodenoscopes
Show answer
US practice: Linked to outbreaks.
7. A failed leak test means the scope should:
- Be dried only
- Be removed from service and not immersed
- Be soaked longer
- Be used
Show answer
US practice: Fluid can damage the scope.
8. Manual cleaning requires:
- No brushing
- Only wiping
- A single quick rinse
- Brushing channels with correctly sized brushes
Show answer
US practice: Follow the IFU.
9. High-level disinfection kills:
- All spores in any quantity
- Only vegetative bacteria
- Nothing; it only cleans
- All microbes except large numbers of spores
Show answer
US practice: Used for semi-critical devices.
10. An automated endoscope reprocessor is used:
- Before use
- Instead of cleaning
- After manual cleaning, to disinfect channels
- To dry only
Show answer
US practice: It does not replace manual cleaning.
Questions 11 to 20
11. Test strips for HLD solution check:
- The wrap
- The water color
- The staff
- The chemical concentration
Show answer
US practice: Minimum effective concentration.
12. Reusable channel brushes should be:
- Shared with patients
- Reused unclean
- Cleaned and disinfected or replaced per IFU
- Thrown on the floor
Show answer
US practice: Dirty brushes spread soil.
13. The final rinse after HLD uses:
- Soapy water
- Any liquid
- Water of the quality required by policy
- Saline
Show answer
US practice: Prevents recontamination.
14. Bedside pre-cleaning also includes:
- Dry wiping and hanging it in storage
- Packing the scope in a wrap at once
- Soaking the scope overnight in saline
- Wiping the insertion tube and flushing channels
Show answer
US practice: Starts soil removal.
15. A visibly damaged scope should be:
- Hidden
- Painted
- Removed from service for repair
- Used carefully
Show answer
US practice: Damage traps soil.
16. Recording scope ID and patient supports:
- Cheaper rinses
- Traceability if exposure occurs
- Shorter cycles
- Faster drying
Show answer
US practice: Needed for lookback.
17. Drying is important because:
- Moisture supports microbial growth
- It adds shine
- It makes scopes lighter
- It saves time
Show answer
US practice: Thorough drying protects patients.
18. Cleaning verification tests are done:
- By guess
- Never
- Only once ever
- As policy requires
Show answer
US practice: Show cleaning works.
19. If a scope fails a cleaning verification test you should:
- Ignore it
- Reprocess and investigate
- Use it
- Dry it only
Show answer
US practice: Find the cause.
20. Leak testing is repeated:
- For every reprocessing cycle
- Only for new scopes
- Never
- Once a year
Show answer
US practice: Catches damage early.
Related chapters
- Previous: Regulations & Standards (US)
- Next: Surgical Instrument Identification
- Chapter 20: Sterile Processing Workflow
- Chapter 21: Regulations & Standards (US)
- Chapter 23: Surgical Instrument Identification
- Chapter 24: Distribution, Transport & Patient Care Equipment
Continue learning
CSSD interview questions Mock tests MCQ practice CSSD NABH checklist
Frequently asked questions
How many Flexible Endoscope Reprocessing MCQs are available?
This page has 20 free MCQs on Flexible Endoscope Reprocessing with answers and explanations. More are added over time.
Is Flexible Endoscope Reprocessing practice free?
Yes. You can practice without login or payment.
Are these official CSSD exam questions?
No. They are original practice questions written for learning.