OT Equipment, Lights and Medical Gases – OT Technician MCQ Questions and Study Notes

OT equipment, lights and medical gases must be checked, used correctly and maintained so that surgery can run safely. Practice free OT Technician MCQ questions on this topic below.

Take the OT Equipment, Lights and Medical Gases practice test All 20 chapters

Learning objectives

Study notes

The OT table, shadowless lights, suction machine, electrosurgical unit, anesthesia machine, monitors and defibrillator are checked before the list starts. Suction pressure, light focus and table movements are tested, and a logbook records checks and faults. Equipment is switched off and cleaned after use. Preventive maintenance is done on schedule.

Medical gases come from pipelines or cylinders and are colour-coded as per the national standard. Cylinders are stored upright and secured, and oil or grease must never touch oxygen fittings because it can catch fire. Gas outlets, pressure gauges and alarms are checked, and a backup power supply such as a generator or UPS must be ready.

Important points

Key terms

Shadowless light Suction Medical gas pipeline Preventive maintenance

Practice MCQs on OT Equipment, Lights and Medical Gases

Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.

Questions 1 to 10

1. OT lights are called shadowless because they:

  1. Cast strong shadows
  2. Reduce shadows over the surgical field
  3. Have no bulbs
  4. Are always dim
Show answer
Answer: B. Reduce shadows over the surgical field
Even lighting helps surgeons.

Report an error in this question

2. Before the list starts the suction machine is checked for:

  1. The label
  2. Its color
  3. Adequate suction pressure
  4. Its weight
Show answer
Answer: C. Adequate suction pressure
Test it before use.

Report an error in this question

3. An OT logbook is used to record:

  1. Parking
  2. Staff lunch times
  3. Menus
  4. Equipment checks and faults
Show answer
Answer: D. Equipment checks and faults
Supports maintenance.

Report an error in this question

4. Preventive maintenance of OT equipment is done:

  1. Never
  2. Only when it breaks
  3. On a planned schedule
  4. Once in ten years
Show answer
Answer: C. On a planned schedule
Prevents breakdowns.

Report an error in this question

5. Oil or grease on oxygen fittings can cause:

  1. Fire
  2. Cooling
  3. Rust only
  4. Better flow
Show answer
Answer: A. Fire
Never lubricate oxygen fittings.

Report an error in this question

6. Gas cylinders should be stored:

  1. Upright and secured
  2. Near heat
  3. Lying loose on the floor
  4. In a wet corridor
Show answer
Answer: A. Upright and secured
Prevents falls and leaks.

Report an error in this question

7. Medical gases are identified by:

  1. Colour coding as per the national standard
  2. The size of the cylinder valve only
  3. The order in which cylinders were delivered
  4. A label written by the staff on tape
Show answer
Answer: A. Colour coding as per the national standard
Check the label too.

Report an error in this question

8. A backup power supply in the OT is:

  1. A candle
  2. A battery for watches
  3. A generator or UPS
  4. A torch only
Show answer
Answer: C. A generator or UPS
Needed for life-support equipment.

Report an error in this question

9. A defibrillator in the OT should be:

  1. Stored in another building
  2. Unplugged
  3. Ready and tested
  4. Locked away
Show answer
Answer: C. Ready and tested
For emergencies.

Report an error in this question

10. An OT table should be checked for:

  1. Smooth movement and locks
  2. The label
  3. Its color
  4. Its brand
Show answer
Answer: A. Smooth movement and locks
Safe positioning.

Report an error in this question

Questions 11 to 20

11. The electrosurgical unit is checked for:

  1. Intact cables and a working return pad lead
  2. The brand name written on the pad
  3. The age of the monitor beside the unit
  4. The color of the footswitch and the cable
Show answer
Answer: A. Intact cables and a working return pad lead
Prevents burns.

Report an error in this question

12. The pressure gauge on a gas cylinder shows:

  1. The cost
  2. The age
  3. The temperature
  4. How much gas is left
Show answer
Answer: D. How much gas is left
Check before use.

Report an error in this question

13. If a piece of equipment is faulty you should:

  1. Repair it yourself
  2. Report it, tag it and remove it from use
  3. Ignore it
  4. Use it carefully
Show answer
Answer: B. Report it, tag it and remove it from use
Prevents harm.

Report an error in this question

14. After use equipment is:

  1. Covered dirty
  2. Switched off and cleaned
  3. Moved to the corridor
  4. Left running
Show answer
Answer: B. Switched off and cleaned
Basic care.

Report an error in this question

15. Earthing and electrical safety checks protect against:

  1. Rust
  2. Electric shock
  3. Noise
  4. Fogging
Show answer
Answer: B. Electric shock
Done by engineers.

Report an error in this question

16. A gas pipeline alarm sounding means:

  1. Open the window
  2. Check the gas supply immediately
  3. Ignore it
  4. Switch off the alarm and continue
Show answer
Answer: B. Check the gas supply immediately
Pressure may be low.

Report an error in this question

17. Cables and tubing should be arranged so that they:

  1. Hang over the sterile field
  2. Cross the floor
  3. Are tied in knots
  4. Do not trip staff or get pulled
Show answer
Answer: D. Do not trip staff or get pulled
Prevents accidents.

Report an error in this question

18. A pulse oximeter and ECG monitor are checked:

  1. For the brand
  2. For weight
  3. For color
  4. For working leads and alarms
Show answer
Answer: D. For working leads and alarms
Alarms must be audible.

Report an error in this question

19. Equipment manuals and service records are:

  1. Kept at home
  2. Hidden
  3. Thrown away
  4. Kept available for staff
Show answer
Answer: D. Kept available for staff
Needed for safe use.

Report an error in this question

20. A defective OT equipment item should be:

  1. Hidden in a corner
  2. Cleaned only
  3. Used if urgent
  4. Tagged and removed from use until repaired
Show answer
Answer: D. Tagged and removed from use until repaired
Prevents patient harm.

Report an error in this question

Related chapters

Continue learning

OT Technician interview questions Mock tests MCQ practice

Frequently asked questions

How many OT Equipment, Lights and Medical Gases MCQs are available?

This page has 20 free MCQs on OT Equipment, Lights and Medical Gases with answers and explanations. More are added over time.

Is OT Equipment, Lights and Medical Gases practice free?

Yes. You can practice without login or payment.

Are these official OT Technician exam questions?

No. They are original practice questions written for learning.