Drinking Water vs Process Water – CSSD MCQ Questions and Study Notes
Drinking water is safe to drink, but process water for reprocessing often needs extra treatment. Practice free CSSD MCQ questions on this topic below.
Take the Drinking Water vs Process Water practice test All 45 chapters
Learning objectives
- Understand the key points of this topic
- Apply them in daily reprocessing practice
Study notes
Potable (drinking) water meets drinking-water standards but still contains minerals and disinfectant. Final rinse and steam generation usually need treated, purified water. The first wash may use potable or softened water if the IFU allows.
Important points
- Potable is not pure
- Final rinse needs treated water
- Follow the IFU
Key terms
Potable water Purified water Softened water
Practice MCQs on Drinking Water vs Process Water
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. Potable water is:
- Mineral-free
- Safe to drink but contains minerals
- Pure H2O
- Sterile
Show answer
Drinking standards are not process standards.
2. Final rinse water is usually:
- Well water
- Rain water
- Untreated tap water
- Treated or purified water
Show answer
Treatment reduces residues.
3. Tap water is often unsuitable for final rinse because:
- Minerals can cause spots and corrosion
- It is too pure
- It is colorless
- It is too cold
Show answer
Minerals dry on devices.
4. Water for the initial wash may be:
- None
- Ocean water
- Potable or softened per the IFU
- Any liquid
Show answer
Check the washer instructions.
5. Which treatment removes dissolved minerals?
- A sand filter only
- Heating
- Reverse osmosis or deionization
- Stirring
Show answer
Purification removes ions.
6. Potable water meets:
- Sterility standards
- Surgical standards
- Local drinking-water standards
- No standard
Show answer
It is not sterile.
7. Potable water may contain:
- Only pure H2O
- Chlorine or chloramine
- Nothing
- Only oxygen
Show answer
Added to kill microbes.
8. Chlorine in feed water can harm:
- Tray labels
- RO membranes unless removed
- Floor tiles
- Wrapping paper
Show answer
Carbon filters remove it.
9. A carbon filter removes:
- Chlorine and organic matter
- Silica
- Hardness
- All salts
Show answer
Common RO pre-treatment.
10. A sediment filter removes:
- Particles
- Dissolved salts
- Silica
- Chlorine only
Show answer
Protects equipment.
Questions 11 to 20
11. The initial wash usually uses:
- Utility water (potable or softened)
- Seawater
- Oil
- Sterile water
Show answer
Final rinse needs better water.
12. Deionized water is made using:
- A sieve
- Ion exchange resins
- A candle
- A fridge
Show answer
Resins swap ions.
13. Bottled drinking water is:
- Always ideal
- Not automatically suitable for final rinse
- Always sterile
- Free of minerals
Show answer
Check the actual quality.
14. Drinking water guidelines commonly place pH roughly between:
- 0 and 2
- 6.5 and 8.5
- 11 and 14
- 1 and 3
Show answer
A typical range.
15. Which water is most likely to leave spots?
- Distilled water
- Hard tap water
- RO water
- Deionized water
Show answer
Minerals dry as spots.
16. Untreated well water is risky because it:
- Is always pure
- Is always soft
- May have unknown minerals and microbes
- Is always sterile
Show answer
Test and treat first.
17. Utility water supply should be tested:
- At intervals set by policy
- Once in a decade
- By guess
- Never
Show answer
Quality can change.
18. Softened water is best used for:
- The final rinse
- Drinking only
- The initial wash to reduce scale
- Steam generators
Show answer
It is not purified.
19. Distilled water is made by:
- Boiling water and condensing the steam
- Adding resin
- Adding salt
- Freezing only
Show answer
A purification method.
20. Treated process water should be:
- Colored
- Tested at defined points
- Left unchecked
- Mixed with tap water
Show answer
Verify the treatment works.
Related chapters
- Previous: Importance of Water Quality
- Next: RO Water
- Chapter 31: Medical Device Reprocessing
- Chapter 32: Importance of Water Quality
- Chapter 34: RO Water
- Chapter 35: TDS
Continue learning
CSSD interview questions Mock tests MCQ practice CSSD NABH checklist
Frequently asked questions
How many Drinking Water vs Process Water MCQs are available?
This page has 20 free MCQs on Drinking Water vs Process Water with answers and explanations. More are added over time.
Is Drinking Water vs Process Water practice free?
Yes. You can practice without login or payment.
Are these official CSSD exam questions?
No. They are original practice questions written for learning.