Silica – CSSD MCQ Questions and Study Notes

Silica in water can leave hard, glassy deposits on devices and equipment. Practice free CSSD MCQ questions on this topic below.

Take the Silica practice test All 45 chapters

Learning objectives

Study notes

Silica comes from sand and rock dissolved in source water. It can deposit on instruments, washers and steam equipment. Softeners do not remove it; RO or deionization designed for silica can reduce it.

Important points

Key terms

Silica Deposit Deionization

Practice MCQs on Silica

Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.

Questions 1 to 10

1. Silica in water can leave:

  1. Hard, glassy or brownish deposits
  2. Oil
  3. Nothing
  4. Soft powder only
Show answer
Answer: A. Hard, glassy or brownish deposits
Silica scale is hard to remove.

Report an error in this question

2. Does a water softener remove silica?

  1. No, softeners remove hardness not silica
  2. Yes, in winter
  3. Yes, completely
  4. Only at night
Show answer
Answer: A. No, softeners remove hardness not silica
Different ions need different treatment.

Report an error in this question

3. Silica matters in steam because:

  1. It makes steam heavier
  2. It can deposit on instruments and equipment
  3. It does nothing
  4. It cools steam
Show answer
Answer: B. It can deposit on instruments and equipment
Deposits can mark devices.

Report an error in this question

4. Silica is reduced by:

  1. Stirring
  2. RO or deionization designed for it
  3. Softening
  4. Boiling
Show answer
Answer: B. RO or deionization designed for it
Check system design.

Report an error in this question

5. Silica in water comes from:

  1. Steel
  2. Soap
  3. Oil
  4. Sand and rocks in the source
Show answer
Answer: D. Sand and rocks in the source
Natural minerals.

Report an error in this question

6. Silica deposits are best prevented by:

  1. Using water that meets the limits
  2. Skipping rinse
  3. More detergent
  4. Hotter wash
Show answer
Answer: A. Using water that meets the limits
Prevention beats removal.

Report an error in this question

7. The chemical name of silica is:

  1. Silicon dioxide
  2. Sodium chloride
  3. Magnesium sulfate
  4. Calcium carbonate
Show answer
Answer: A. Silicon dioxide
Found in sand and rock.

Report an error in this question

8. Silica scale is difficult to remove because it is:

  1. Soft and powdery
  2. Oily
  3. Wet
  4. Hard and glassy
Show answer
Answer: D. Hard and glassy
Needs special descaling.

Report an error in this question

9. Silica can pass through:

  1. RO membranes fully
  2. Nothing
  3. Standard softeners
  4. Distillers
Show answer
Answer: C. Standard softeners
Softeners only remove hardness.

Report an error in this question

10. Silica can be measured with:

  1. A lab test or test kit
  2. A ruler
  3. A clock
  4. A scale
Show answer
Answer: A. A lab test or test kit
Use a proper test.

Report an error in this question

Questions 11 to 20

11. Silica limits matter most for:

  1. Linen
  2. Gloves
  3. Paper labels
  4. Steam generators and boilers
Show answer
Answer: D. Steam generators and boilers
Silica deposits in steam equipment.

Report an error in this question

12. High silica in steam may:

  1. Cool the steam
  2. Make steam heavier
  3. Do nothing
  4. Deposit on instruments and sterilizer parts
Show answer
Answer: D. Deposit on instruments and sterilizer parts
Marks and damage.

Report an error in this question

13. Silica can be reduced by:

  1. RO, distillation or anion deionization
  2. Boiling only
  3. Stirring
  4. Softening only
Show answer
Answer: A. RO, distillation or anion deionization
Choose a system designed for it.

Report an error in this question

14. A silica deposit often looks like:

  1. Black oil
  2. A blue stain
  3. A white, cloudy or glassy film
  4. A red stain
Show answer
Answer: C. A white, cloudy or glassy film
Hard film on surfaces.

Report an error in this question

15. Silica deposits should be removed with:

  1. Bleach
  2. Approved descaling agents per IFU
  3. Sandpaper
  4. A metal scraper
Show answer
Answer: B. Approved descaling agents per IFU
Scraping damages devices.

Report an error in this question

16. Silica in water comes mainly from:

  1. Steel
  2. Sand, rock and groundwater
  3. Plastic
  4. Soap
Show answer
Answer: B. Sand, rock and groundwater
Natural source.

Report an error in this question

17. Source water silica can change by season, so you should:

  1. Keep monitoring
  2. Test once only
  3. Ignore it
  4. Stop testing
Show answer
Answer: A. Keep monitoring
Results vary.

Report an error in this question

18. Silica needs its own test because:

  1. It is a different contaminant from hardness
  2. It never matters
  3. It is the same as hardness
  4. It is the same as chloride
Show answer
Answer: A. It is a different contaminant from hardness
Each contaminant needs checking.

Report an error in this question

19. Silica in boilers can reduce:

  1. Heat transfer
  2. Weight
  3. Color
  4. Pressure only
Show answer
Answer: A. Heat transfer
Deposits insulate surfaces.

Report an error in this question

20. Silica results should be:

  1. Guessed
  2. Compared with the limit and recorded
  3. Hidden
  4. Ignored
Show answer
Answer: B. Compared with the limit and recorded
Records support quality.

Report an error in this question

Related chapters

Continue learning

CSSD interview questions Mock tests MCQ practice CSSD NABH checklist

Frequently asked questions

How many Silica MCQs are available?

This page has 20 free MCQs on Silica with answers and explanations. More are added over time.

Is Silica practice free?

Yes. You can practice without login or payment.

Are these official CSSD exam questions?

No. They are original practice questions written for learning.