Chloride – CSSD MCQ Questions and Study Notes

Chloride in water can attack stainless steel and cause pitting corrosion. Practice free CSSD MCQ questions on this topic below.

Take the Chloride practice test All 45 chapters

Learning objectives

Study notes

Chloride is a salt ion found in tap water and some products. It breaks down the protective layer on stainless steel and causes pits. This is why saline is avoided on instruments and why chloride limits matter in rinse and steam water.

Important points

Key terms

Chloride Pitting Passive layer

Practice MCQs on Chloride

Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.

Questions 1 to 10

1. Chloride in water can cause:

  1. Softening of steel
  2. Pitting corrosion of stainless steel
  3. Only scale
  4. Extra shine
Show answer
Answer: B. Pitting corrosion of stainless steel
Chloride is corrosive.

Report an error in this question

2. Chloride is a risk because it:

  1. Strengthens the layer
  2. Attacks the protective layer of steel
  3. Does nothing
  4. Cools the steel
Show answer
Answer: B. Attacks the protective layer of steel
Pits then form.

Report an error in this question

3. Chloride is found in:

  1. Tap water, salt and some products
  2. Only oil
  3. Only distilled water
  4. Only RO water
Show answer
Answer: A. Tap water, salt and some products
Salt contains chloride.

Report an error in this question

4. Saline on instruments should be avoided because of:

  1. Color
  2. Weight
  3. Chloride
  4. Temperature
Show answer
Answer: C. Chloride
It can pit instruments.

Report an error in this question

5. Which treatment lowers chloride?

  1. Reverse osmosis or deionization
  2. Cooling
  3. A sand filter
  4. Boiling
Show answer
Answer: A. Reverse osmosis or deionization
Purification removes ions.

Report an error in this question

6. Rust-colored pits may suggest:

  1. Cold storage
  2. Good cleaning
  3. Corrosion from poor water or chlorides
  4. Over-lubrication
Show answer
Answer: C. Corrosion from poor water or chlorides
Review water and cleaning agents.

Report an error in this question

7. The symbol for chloride is:

  1. Mg
  2. Si
  3. Cl−
  4. Ca
Show answer
Answer: C. Cl−
A negatively charged ion.

Report an error in this question

8. Stainless steel resists corrosion because of:

  1. A chromium oxide surface layer
  2. Oil
  3. Paint
  4. Wax
Show answer
Answer: A. A chromium oxide surface layer
Chloride attacks this layer.

Report an error in this question

9. Chloride limits for steam are:

  1. Unlimited
  2. Irrelevant
  3. High
  4. Very low, as set by the maker
Show answer
Answer: D. Very low, as set by the maker
Follow the sterilizer specification.

Report an error in this question

10. Which product can contain chloride and harm instruments?

  1. Distilled water
  2. Bleach (hypochlorite)
  3. Neutral detergent
  4. RO water
Show answer
Answer: B. Bleach (hypochlorite)
Avoid it on stainless steel.

Report an error in this question

Questions 11 to 20

11. Bleach on stainless steel can cause:

  1. Softer steel
  2. Nothing
  3. Extra shine
  4. Pitting corrosion
Show answer
Answer: D. Pitting corrosion
Avoid unless the IFU allows.

Report an error in this question

12. Chloride in the CSSD can come from:

  1. Only distilled water
  2. Tap water, saline, some disinfectants and body fluids
  3. Only RO water
  4. Nowhere
Show answer
Answer: B. Tap water, saline, some disinfectants and body fluids
Salt is everywhere.

Report an error in this question

13. After contact with blood or saline instruments should be:

  1. Left to dry
  2. Heated first
  3. Rinsed thoroughly soon after
  4. Packed at once
Show answer
Answer: C. Rinsed thoroughly soon after
Removes salts.

Report an error in this question

14. Pitting corrosion looks like:

  1. Small holes or pits on the surface
  2. A smooth shine
  3. A color band
  4. A bright coat
Show answer
Answer: A. Small holes or pits on the surface
Pits trap soil.

Report an error in this question

15. Crevice corrosion happens:

  1. On flat open surfaces only
  2. Never
  3. Only in plastic
  4. In tight joints where chloride collects
Show answer
Answer: D. In tight joints where chloride collects
Clean joints well.

Report an error in this question

16. Chloride can be measured with:

  1. A ruler
  2. A thermometer
  3. Test strips or lab tests
  4. A clock
Show answer
Answer: C. Test strips or lab tests
Use a suitable test.

Report an error in this question

17. Does a water softener remove chloride?

  1. Only at night
  2. Yes, fully
  3. Yes, in winter
  4. No
Show answer
Answer: D. No
Softeners remove hardness.

Report an error in this question

18. RO treatment chloride levels:

  1. Reduces them greatly
  2. Does nothing
  3. Doubles them
  4. Raises them
Show answer
Answer: A. Reduces them greatly
Purification removes ions.

Report an error in this question

19. Pitted instruments are hard to clean because pits:

  1. Weigh too much
  2. Cool the steel
  3. Shine too much
  4. Trap soil and microbes
Show answer
Answer: D. Trap soil and microbes
Remove from use.

Report an error in this question

20. Saline-soaked instruments should be:

  1. Rinsed well soon after use
  2. Packed wet
  3. Boiled in saline
  4. Dried in saline
Show answer
Answer: A. Rinsed well soon after use
Salt left on steel causes pits.

Report an error in this question

Related chapters

Continue learning

CSSD interview questions Mock tests MCQ practice CSSD NABH checklist

Frequently asked questions

How many Chloride MCQs are available?

This page has 20 free MCQs on Chloride with answers and explanations. More are added over time.

Is Chloride practice free?

Yes. You can practice without login or payment.

Are these official CSSD exam questions?

No. They are original practice questions written for learning.