Sterilization Monitoring – CSSD MCQ Questions and Study Notes
Sterilization monitoring combines physical, chemical and biological checks to prove each load was processed correctly. Practice free CSSD MCQ questions on this topic below.
Take the Sterilization Monitoring practice test All 45 chapters
Learning objectives
- Understand the key concepts of this chapter
- Apply them in safe practice
Study notes
Physical monitors are the cycle printout or display: time, temperature and pressure. Chemical indicators show exposure and biological indicators confirm lethality.
Every load is reviewed before release. Any failed parameter means the load is not released. Records for each load are kept, including load contents, cycle, operator and results.
Important points
- Review printout every load
- Release only after all checks pass
- Keep load records
- Failures trigger investigation
Key terms
Physical monitor Load release Parametric release Cycle printout
Practice MCQs on Sterilization Monitoring
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. Physical monitoring means checking:
- Time, temperature, pressure
- Tags
- Color
- Noise
Show answer
Cycle parameters.
2. Load release requires:
- A signature only
- Passing physical and chemical checks
- Nothing
- Only tape
Show answer
All checks pass.
3. A failed cycle printout means:
- Ignore
- Store it
- Load is not released
- Load is used
Show answer
Do not release.
4. Records should include:
- Weather
- Menu
- Nothing
- Load contents, cycle, operator
Show answer
Traceability.
5. Biological indicators are used to:
- Wash items
- Store
- Label
- Confirm sterilizer lethality
Show answer
Spore kill proof.
6. Chemical indicator alone:
- Does not prove sterility
- Proves sterility
- Replaces BI
- Replaces printout
Show answer
Shows exposure only.
7. Who reviews load results?
- Anyone
- Trained staff
- Visitor
- Patient
Show answer
Competent staff.
8. Monitoring failures lead to:
- Nothing
- Discarding records
- Silence
- Investigation and corrective action
Show answer
Root cause needed.
9. Cycle printouts should be:
- Kept per policy
- Painted
- Erased
- Thrown away
Show answer
Retention required.
10. Implant loads are:
- Wet
- Released instantly
- Quarantined until BI result per policy
- Ignored
Show answer
Await BI.
Questions 11 to 20
11. Physical monitoring of an autoclave includes checking:
- Temperature, pressure and time
- Color
- Odor
- Weight
Show answer
India practice: gauges and printouts.
12. Which monitor gives the best proof of sterilizer efficacy?
- Visual check
- Noise
- External tape only
- Biological indicator
Show answer
India practice: BI.
13. Bowie-Dick test is done:
- After every load in any steam sterilizer
- Once a month during routine maintenance
- Once a week before the last load of the day
- Daily before the first load in a pre-vacuum autoclave
Show answer
India practice: empty chamber.
14. Sterilization records help in:
- Noise
- Speed
- Traceability and audit
- Cost cutting
Show answer
India practice: NABH documentation.
15. If the autoclave printout shows low temperature, the load is:
- Stored
- Released
- Ignored
- Not released
Show answer
India practice: reprocess.
16. Which record proves a cycle ran as set?
- The weight of the load on the trolley
- A note written by the supervisor next day
- The printout of time, temperature and pressure
- The color of the indicator tape alone
Show answer
Physical monitor.
17. Who should review the cycle printout before release?
- The patient
- A visitor
- Trained staff
- Anyone passing by
Show answer
Competent review.
18. A Class 6 chemical indicator is also called:
- A Bowie-Dick test
- A biological vial
- A process tape
- An emulating indicator
Show answer
Classes follow ISO 11140-1.
19. If the chemical indicator in a pack is incomplete you should:
- Hide it
- Rewrap it
- Release it
- Not release it and investigate
Show answer
Treat as a failed pack.
20. A load control number identifies:
- The staff name
- The tray color
- The sterilizer, cycle and load
- The pack weight
Show answer
Supports traceability.
Related chapters
- Chapter 11: Biological Indicators
- Chapter 12: Bowie-Dick / Air Removal Testing
- Chapter 14: Storage & Event-Related Sterility
- Chapter 15: Instrument Tracking
Continue learning
CSSD interview questions Mock tests MCQ practice CSSD NABH checklist
Frequently asked questions
How many Sterilization Monitoring MCQs are available?
This page has 20 free MCQs on Sterilization Monitoring with answers and explanations. More are added over time.
Is Sterilization Monitoring practice free?
Yes. You can practice without login or payment.
Are these official CSSD exam questions?
No. They are original practice questions written for learning.