Image Quality – Radiology MCQ Questions and Study Notes
Image quality depends on exposure factors, positioning and equipment. Practice free Radiology MCQ questions on this topic below.
Take the Image Quality practice test All 8 chapters
Learning objectives
- Understand the key concepts of this chapter
- Apply them in safe practice
Study notes
Key image qualities are contrast, density, sharpness (spatial resolution) and noise. Proper kVp, mAs and positioning improve diagnostic quality.
Motion causes blurring, so clear breathing instructions and short exposure times help.
Important points
- Correct kVp and mAs
- Minimize motion
- Position accurately
- Check image before release
Key terms
Contrast Density Noise Motion blur
Practice MCQs on Image Quality
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. Motion during exposure causes:
- Blurring
- Contrast
- Sharpness
- Density
Show answer
Reduce with short time.
2. Too little mAs produces:
- Perfect image
- Noisy/light image
- Dark image
- Nothing
Show answer
Underexposure.
3. Higher kVp usually reduces:
- Contrast
- Dose only
- Speed
- Penetration
Show answer
Longer scale.
4. Image sharpness relates to:
- Spatial resolution
- Color
- Weight
- Cost
Show answer
Detail.
5. Before release, radiographers:
- Delete
- Skip
- Check image quality
- Guess
Show answer
Avoid repeats.
6. Breathing instructions help reduce:
- Motion
- Cost
- Noise only
- Dose
Show answer
Patient cooperation.
7. Contrast in an image means:
- The difference in density between structures
- The film cost
- The patient's age
- The room brightness
Show answer
Helps to see detail.
8. Spatial resolution is the ability to:
- Show small details clearly
- Reduce dose
- Cool the tube
- Show large structures only
Show answer
Measured in line pairs per mm.
9. Noise in an image appears as:
- A clear picture
- A grainy random pattern
- A bright flash
- A sharp edge
Show answer
Often caused by low exposure.
10. Magnification increases when the object is:
- Fixed
- Behind the receptor
- Touching the receptor
- Further from the image receptor
Show answer
Keep the part close.
Questions 11 to 20
11. Distortion happens when:
- The grid is used
- The exposure is perfect
- The part or beam is poorly aligned
- The patient is still
Show answer
Shape and size change.
12. In digital radiography using too much exposure may:
- Be seen at once as a dark film
- Go unnoticed because the image still looks good
- Reduce dose
- Cool the room
Show answer
Dose creep.
13. Under-exposure of a digital image gives:
- No image
- A noisy grainy image
- A dark image
- A sharp image
Show answer
Repeat if diagnostic quality is lost.
14. A grid improves contrast by:
- Adding scatter
- Heating the beam
- Cooling the patient
- Absorbing scattered radiation
Show answer
Needs a higher dose.
15. Scattered radiation:
- Improves contrast
- Reduces image contrast
- Has no effect
- Cools the receptor
Show answer
Controlled by collimation and grids.
16. An exposure index shows:
- The film cost
- The patient's weight
- The room temperature
- How much radiation reached the detector
Show answer
Check it for every image.
17. Jewellery or clothing in the field can cause:
- Artifacts
- A cooler beam
- Smaller dose
- Better contrast
Show answer
Remove them.
18. A repeat X-ray is mainly caused by:
- Clean equipment
- Positioning or exposure errors
- A well-trained team
- A perfect technique
Show answer
Aim to minimize repeats.
19. Reject analysis is done to:
- Save film
- Find the causes of repeats and improve quality
- Hide errors
- Increase repeats
Show answer
A quality tool.
20. Window level and width are used to adjust:
- The room lights only
- The patient's position
- Brightness and contrast of the displayed image
- The tube voltage
Show answer
Digital display control.
Questions 21 to 21
21. A smaller focal spot improves:
- Image sharpness
- Dose to the staff
- Tube cooling
- Patient weight
Show answer
At the cost of tube heat.
Related chapters
- Previous: Radiographic Positioning
- Next: Radiation Protection
- Chapter 2: X-ray Equipment
- Chapter 3: Radiographic Positioning
- Chapter 5: Radiation Protection
- Chapter 6: CT Basics
Continue learning
Radiology interview questions Mock tests MCQ practice
Frequently asked questions
How many Image Quality MCQs are available?
This page has 21 free MCQs on Image Quality with answers and explanations. More are added over time.
Is Image Quality practice free?
Yes. You can practice without login or payment.
Are these official Radiology exam questions?
No. They are original practice questions written for learning.