Low Temperature Sterilization – CSSD MCQ Questions and Study Notes
Low temperature sterilization is used for heat- and moisture-sensitive devices. Practice free CSSD MCQ questions on this topic below.
Take the Low Temperature Sterilization practice test All 45 chapters
Learning objectives
- Understand the key concepts of this chapter
- Apply them in safe practice
Study notes
Low temperature methods include ethylene oxide, hydrogen peroxide gas plasma, vaporized hydrogen peroxide and ozone or peracetic-acid based systems. Each has device compatibility limits.
Always confirm compatibility in the device IFU, including lumen length and diameter limits. Items must be clean and completely dry, and cellulose materials are not used in hydrogen peroxide systems.
Important points
- Check IFU compatibility
- Items must be dry
- Avoid cellulose in peroxide systems
- Never assume steam alternatives
Key terms
Low temperature Compatibility Aeration Lumen claims
Practice MCQs on Low Temperature Sterilization
Tap “Show answer” to check each answer and read the explanation. These practice questions are written for learning with AI assistance and may contain mistakes. Please report any error so it can be fixed.
Questions 1 to 10
1. Low temperature methods suit items that are:
- Dirty
- Heat and moisture sensitive
- Wet
- Heat stable
Show answer
Heat-sensitive devices.
2. Device compatibility is confirmed from:
- Colleagues
- Guesswork
- The IFU
- Color
Show answer
IFU controls.
3. Items must be dry before hydrogen peroxide cycles to:
- Look better
- Avoid cycle cancellation and failure
- Save cost
- Cool
Show answer
Moisture disrupts vapor.
4. Which material should not be used in peroxide systems?
- Metal
- Tyvek
- Polyethylene
- Cellulose (paper, linen)
Show answer
Cellulose absorbs peroxide.
5. Which is a low temperature method?
- Dry heat
- Ethylene oxide
- Flash steam
- Boiling
Show answer
EtO is low temperature.
6. Lumen length and diameter limits are found:
- Nowhere
- In sterilizer and device IFU
- On labels
- On the door
Show answer
Validated claims.
7. Aeration is required after:
- Peroxide only
- Steam
- Ethylene oxide
- Dry heat
Show answer
Removes toxic residuals.
8. Low temperature sterilization needs prior:
- Painting
- Thorough cleaning
- Weighing
- Nothing
Show answer
Soil blocks the sterilant.
9. Using an unvalidated cycle for a device:
- Is faster
- Is encouraged
- May fail to sterilize
- Is safe
Show answer
Always use validated cycles.
10. Sterilizer selection depends on:
- Price alone
- Device compatibility and IFU
- Convenience
- Tray color
Show answer
Compatibility first.
Questions 11 to 20
11. OSHA's 8-hour limit for ethylene oxide exposure is:
- 1 ppm TWA
- 50 ppm
- 100 ppm
- 0 ppm
Show answer
US practice: OSHA EtO standard (with a 5 ppm 15-minute excursion limit).
12. Which material must be avoided in hydrogen peroxide gas plasma sterilization?
- Cellulose (paper, linen)
- Tyvek
- Stainless steel
- Polypropylene
Show answer
US practice: cellulose absorbs peroxide.
13. Liquid chemical sterilant processing is generally intended for:
- Wrapped packs
- Immediate-use of items that cannot be steam sterilized
- Long-term storage
- Routine implant storage
Show answer
US practice: items are used immediately, not stored.
14. EtO aeration is done to:
- Dry
- Label
- Remove toxic residuals
- Cool
Show answer
US practice: prevents patient and staff exposure.
15. Low-temperature sterilizer choice must follow:
- Price only
- Convenience
- Habit
- Device IFU and sterilizer validation
Show answer
US practice: compatibility and validated lumen claims.
16. Which low-temperature method uses a toxic, flammable gas?
- Ethylene oxide
- Boiling
- Dry heat
- Steam
Show answer
EtO needs special safety controls.
17. Why are endoscopes often sterilized at low temperature?
- They are too heavy
- They are too clean
- They are too small
- Heat can damage them
Show answer
Heat-sensitive devices.
18. Ozone-based sterilization is:
- A steam process
- A dry heat process
- A cleaning step
- A low-temperature process using ozone
Show answer
Check device compatibility.
19. Which indicators should be used in a low-temperature load?
- Indicators kept from an old steam load
- No indicator because the process is gentle
- Any steam indicator tape that is available
- Indicators made for that specific process
Show answer
Indicators are process-specific.
20. Which items often go to low-temperature processing?
- Glass jars
- Stainless steel bowls
- Cameras, fiberoptic cables and some plastics
- Linen
Show answer
They cannot tolerate steam.
Related chapters
- Previous: Steam Sterilization
- Next: Hydrogen Peroxide Plasma / VH2O2
- Chapter 5: Sterilization Principles
- Chapter 6: Steam Sterilization
- Chapter 8: Hydrogen Peroxide Plasma / VH2O2
- Chapter 9: ETO Sterilization
Continue learning
CSSD interview questions Mock tests MCQ practice CSSD NABH checklist
Frequently asked questions
How many Low Temperature Sterilization MCQs are available?
This page has 20 free MCQs on Low Temperature Sterilization with answers and explanations. More are added over time.
Is Low Temperature Sterilization practice free?
Yes. You can practice without login or payment.
Are these official CSSD exam questions?
No. They are original practice questions written for learning.